🎉 Up to 70% Off Selected ItemsShop Sale
HomeStore

Audio Technica ATW252 Handheld Wireless Microphone

Product image 1

Audio Technica ATW252 Handheld Wireless Microphone

ATW-R250 receiver and ATW-T202 handheld microphone/transmitter.

Audio-Technica's Freeway 200 Series Wireless Systems are designed to provide reliable performance, easy setup and clear, natural sound quality. Each 200 Series professional VHF wireless system includes a receiver and either a body-pack transmitter or a handheld microphone/transmitter on a specific crystal-controlled frequency. A novel dipole antenna system on the receiver improves operation by providing a ground element in addition to the usual signal element.

Features:
  • Easy operation and clear, natural sound quality
  • Reliable performance and durable construction
  • Advanced dipole antenna system for extended operating range
  • Power, RF, and AF Peak indicators
  • Volume control, 1/4" output jack and space-saving power supply
  • Rugged unidirectional dynamic element on handheld microphone/transmitter
  • Variable microphone trim control and easily accessible On/Standby/Off switch on transmitters
  • Professional locking connector on UniPak® body-pack transmitter
RECEIVER SPECIFICATIONS
  • Receiving System - Non-diversity, single-channel, dual antenna system
  • Image Rejection - 50 dB minimum
  • Signal-to-noise Ratio - 80 dB at 10 kHz deviation (IEC-weighted), maximum modulation 15 kHz
  • Sensitivity - 20 dBµV for 60 dB S/N (IEC-weighted)
  • Audio Output - 350 mV (1 kHz modulation, 10 kHz deviation, 100 k ohm load)
  • Output Connector - 1/4" TS ("mono") phone jack
  • Power Supply - 100-240V AC (50/60 Hz) to 12V DC 1A (center positive) switched mode external power supply
  • Dimensions - 7.48" W x 1.65" H x 5.12" D
  • Net Weight - 11.0 oz (311 g)
  • Accessory Included - Power supply
HANDHELD TRANSMITTER SPECIFICATIONS
  • RF Power Output - 10 mW High position, 2 mW Low position, typical
  • Spurious Emissions - Under federal regulations
  • Microphone Element - Dynamic unidirectional
  • Battery - 9V (NEDA type 1604) alkaline, not included
  • Current Consumption - 30 mA typical
  • Battery Life - Approximately 15 hours in High position; Approximately 20 hours in Low position (depending on battery type and use pattern)
  • Dimensions - 9.50" long, 2.10" maximum diameter
  • Net Weight - 12.7 oz (360 g) (without battery)
  • Accessory Included - AT8456a Quiet-Flex™ stand clamp
$24.00

Original: $79.99

-70%
Audio Technica ATW252 Handheld Wireless Microphone—

$79.99

$24.00

Product Information

Shipping & Returns

Description

ATW-R250 receiver and ATW-T202 handheld microphone/transmitter.

Audio-Technica's Freeway 200 Series Wireless Systems are designed to provide reliable performance, easy setup and clear, natural sound quality. Each 200 Series professional VHF wireless system includes a receiver and either a body-pack transmitter or a handheld microphone/transmitter on a specific crystal-controlled frequency. A novel dipole antenna system on the receiver improves operation by providing a ground element in addition to the usual signal element.

Features:
  • Easy operation and clear, natural sound quality
  • Reliable performance and durable construction
  • Advanced dipole antenna system for extended operating range
  • Power, RF, and AF Peak indicators
  • Volume control, 1/4" output jack and space-saving power supply
  • Rugged unidirectional dynamic element on handheld microphone/transmitter
  • Variable microphone trim control and easily accessible On/Standby/Off switch on transmitters
  • Professional locking connector on UniPak® body-pack transmitter
RECEIVER SPECIFICATIONS
  • Receiving System - Non-diversity, single-channel, dual antenna system
  • Image Rejection - 50 dB minimum
  • Signal-to-noise Ratio - 80 dB at 10 kHz deviation (IEC-weighted), maximum modulation 15 kHz
  • Sensitivity - 20 dBµV for 60 dB S/N (IEC-weighted)
  • Audio Output - 350 mV (1 kHz modulation, 10 kHz deviation, 100 k ohm load)
  • Output Connector - 1/4" TS ("mono") phone jack
  • Power Supply - 100-240V AC (50/60 Hz) to 12V DC 1A (center positive) switched mode external power supply
  • Dimensions - 7.48" W x 1.65" H x 5.12" D
  • Net Weight - 11.0 oz (311 g)
  • Accessory Included - Power supply
HANDHELD TRANSMITTER SPECIFICATIONS
  • RF Power Output - 10 mW High position, 2 mW Low position, typical
  • Spurious Emissions - Under federal regulations
  • Microphone Element - Dynamic unidirectional
  • Battery - 9V (NEDA type 1604) alkaline, not included
  • Current Consumption - 30 mA typical
  • Battery Life - Approximately 15 hours in High position; Approximately 20 hours in Low position (depending on battery type and use pattern)
  • Dimensions - 9.50" long, 2.10" maximum diameter
  • Net Weight - 12.7 oz (360 g) (without battery)
  • Accessory Included - AT8456a Quiet-Flex™ stand clamp